Site Under Construction

Induction Systems Quality Monitoring System gives the assurance you need in today's quality driven market place. QMS was designed to instantly identify problems with process variables such as quench temperature & flow, generator voltage, frequency, kilowatt power, and more. It integrates with all brands of induction heating equipment - new or used. All that is required is an analog signal for each process variable and 120VAC. The free standing NEMA 12 workstation installs in minutes. Our software operates in the Microsoft Windows 98/NT environment and is easy to setup and use.

System Operation: Set the QMS to “teach” mode, when the cycle starts the system’s variables are plotted (in real time) on graphs. After the cycle is complete the QMS runs through a series of calculations to configure the high and low limits. A “file save as” dialog box saves the variables as a file. This file can be recalled for future use. The QMS will automatically advance to “run” mode. Every cycle thereafter will compare the incoming variables with the high & low limits. At the end of each “run” mode cycle a result dialog box appears. If a variable falls outside of the limits the QMS will warn the operator. A reset is needed to continue.

	View six graphs at once on the large 12.1” display
	Industrial NEMA 12 work station
	15.0” computer monitor
	1 + GHz IBM type computer system
	8 Channel analog to digital I/O board (16 CH optional)
	12 bit resolution, 100 kS/sample, A/D computer board
	8 Channel solid state input / output board
	QMSÔ software - Store over one million QMS profiles
	Measures any analog signal
	Add a printer for graph printing

Typical monitoring applications:

	Generator kilowatts, volts,& frequency
	Quench temperature & flow
	Part temperature
	Scan speed
	Other analog signals
	Dimensions: 24 x 24 x 65 shown, 20 x 24 x 36